I was getting quite annoyed by having the harness straps slapping me around the face at higher speeds when out driving – finding it quite distracting.
I don’t use the roof or doors so the wind can really whip around.
Got on amazon and purchased some velcro
You need to cut 4 strips approximately 35cm long, so that is more than enough velcro.
![](https://310build.com/wp-content/uploads/2022/07/image-1024x746.jpg)
Then add the plastic buckle, before wrapping them around the bottom of the harness. Very simple and took all of 5 minutes.
I then took the car out for a spin – surprised how much of a difference this made and can’t believe I didn’t do something so simple earlier!
![](https://310build.com/wp-content/uploads/2022/07/20220704_121650_resized9075-768x1024.jpg)